{"title":"Gen 3 (V4) Mounts","description":"","products":[{"product_id":"starlink-standard-gen-3-v4-pole-adapter","title":"Starlink Standard (Gen 3 \/ V4) Pole Adapter – Heavy Duty Aluminium","description":"\u003cp\u003e\u003cem\u003e✅ Compatibility note: This product suits the \u003cstrong\u003eStarlink Standard (Gen 3 \/ V4)\u003c\/strong\u003e flat rectangular terminal, also commonly called \u003cstrong\u003eStandard Kit, Standard 4 or V4\u003c\/strong\u003e. It does \u003cstrong\u003enot\u003c\/strong\u003e suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.\u003c\/em\u003e\u003c\/p\u003e\u003cp data-end=\"405\" data-start=\"115\"\u003eThe Starlink Standard (Gen 3 \/ V4) Heavy Duty Pole Adapter is a precision-engineered mounting interface designed to secure the Starlink Standard (Gen 3 \/ V4) terminal to an existing pole or mast. It is intended for fixed installations where mechanical strength, long-term durability, and slip resistance are critical.\u003c\/p\u003e\n\u003cp data-end=\"813\" data-start=\"407\"\u003eMachined from solid aluminium billet and manufactured in Australia, this adapter provides a rigid connection between the Starlink Standard (Gen 3 \/ V4) terminal and round poles ranging from 30 mm to 51 mm in diameter. The design supports both internal and external cable routing and is suitable for use with roof-mounted, wall-mounted, or free-standing pole structures when paired with an appropriate mounting system.\u003c\/p\u003e\n\u003cp data-end=\"984\" data-start=\"815\"\u003e⚠️ \u003cem data-end=\"984\" data-start=\"818\"\u003e\u003cstrong data-end=\"983\" data-start=\"819\"\u003eThis product is a pole adapter only. It is not a pole, mount, or freestanding structure. Installation must be onto an existing, structurally sound mast or pole.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFor maximum strength and long lasting installation they can be used with our \u003ca href=\"https:\/\/spacetek.com.au\/products\/starlink-mount-roof-kit-for-dishy-rectangle-gen-2\" title=\"Tin Roof Mount Kit\" rel=\"noopener\" target=\"_blank\"\u003eroof mount kit for Gen 2\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/spacetek.com.au\/products\/tin-roof-starlink-mount-roof-kit-for-dishy-gen-3-v4\" title=\"Starlink Gen 3 Roof Mount Kit\" rel=\"noopener\" target=\"_blank\"\u003eAlso available in a Roof Kit Bundle with everything you require for Standard (Gen 3 \/ V4) roof mounting\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 data-end=\"1010\" data-start=\"991\"\u003e\u003cstrong data-end=\"1010\" data-start=\"994\"\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"1151\" data-start=\"1012\"\u003e✅ \u003cstrong data-end=\"1054\" data-start=\"1015\"\u003eSolid Billet Aluminium Construction\u003c\/strong\u003e — CNC-machined from solid aluminium billet for high rigidity and long-term mechanical stability.\u003c\/p\u003e\n\u003cp data-end=\"1267\" data-start=\"1153\"\u003e✅ \u003cstrong data-end=\"1183\" data-start=\"1156\"\u003eAustralian Manufactured\u003c\/strong\u003e — Designed and produced in Australia to meet high material and machining standards.\u003c\/p\u003e\n\u003cp data-end=\"1381\" data-start=\"1269\"\u003e✅ \u003cstrong data-end=\"1299\" data-start=\"1272\"\u003eWide Pole Compatibility\u003c\/strong\u003e — Clamps securely to round poles with diameters from 30 mm to 51 mm (1.18″–2.0″).\u003c\/p\u003e\n\u003cp data-end=\"1517\" data-start=\"1383\"\u003e✅ \u003cstrong data-end=\"1417\" data-start=\"1386\"\u003eStandard (Gen 3 \/ V4) Direct Interface\u003c\/strong\u003e — Purpose-built to replace the factory kickstand and mount directly to the Starlink Standard (Gen 3 \/ V4) terminal.\u003c\/p\u003e\n\u003cp data-end=\"1648\" data-start=\"1519\"\u003e✅ \u003cstrong data-end=\"1560\" data-start=\"1522\"\u003eInternal or External Cable Routing\u003c\/strong\u003e — Allows the Starlink cable to be routed through the pole or externally along the mast.\u003c\/p\u003e\n\u003cp data-end=\"1782\" data-start=\"1650\"\u003e✅ \u003cstrong data-end=\"1674\" data-start=\"1653\"\u003eTool-Free Removal\u003c\/strong\u003e — Designed for secure installation without requiring specialised tools for future removal or repositioning.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eVersatile Pole Compatibility\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe adapter is compatible with a wide range of pole sizes, accommodating diameters from 30mm to 51mm (1.18 to 2 inches). This versatility makes it an ideal choice for various setups, whether for home, mobile, or outdoor environments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 30mm to 51mm (1.18 to 2 inches) Poles:\u003c\/strong\u003e Versatile sizing ensures compatibility with a variety of pole sizes, making it easy to integrate into your current setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect for Different Installations:\u003c\/strong\u003e Suitable for a wide range of applications, providing a stable mount for your Starlink Standard (Gen 3 \/ V4) terminal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"1810\" data-start=\"1789\"\u003e\u003cstrong data-end=\"1810\" data-start=\"1792\"\u003eSpecifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul data-end=\"2155\" data-start=\"1812\"\u003e\n\u003cli data-end=\"1855\" data-start=\"1812\"\u003e\n\u003cp data-end=\"1855\" data-start=\"1814\"\u003eMaterial: CNC-machined aluminium billet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1894\" data-start=\"1856\"\u003e\n\u003cp data-end=\"1894\" data-start=\"1858\"\u003eCompatibility: Starlink Standard (Gen 3 \/ V4)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1933\" data-start=\"1895\"\u003e\n\u003cp data-end=\"1933\" data-start=\"1897\"\u003ePole Diameter Range: 30 mm – 51 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1969\" data-start=\"1934\"\u003e\n\u003cp data-end=\"1969\" data-start=\"1936\"\u003eMount Type: Pole \/ mast adapter\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2009\" data-start=\"1970\"\u003e\n\u003cp data-end=\"2009\" data-start=\"1972\"\u003eCable Routing: Internal or external\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2039\" data-start=\"2010\"\u003e\n\u003cp data-end=\"2039\" data-start=\"2012\"\u003eFinish: Natural aluminium\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2101\" data-start=\"2040\"\u003e\n\u003cp data-end=\"2101\" data-start=\"2042\"\u003eFixings: Stainless steel bolts and grub screws (included)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2155\" data-start=\"2102\"\u003e\n\u003cp data-end=\"2155\" data-start=\"2104\"\u003eInstallation Surface: Existing round pole or mast\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"2190\" data-start=\"2162\"\u003e\u003cstrong data-end=\"2190\" data-start=\"2165\"\u003eInstallation Overview\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col data-end=\"2837\" data-start=\"2192\"\u003e\n\u003cli data-end=\"2291\" data-start=\"2192\"\u003e\n\u003cp data-end=\"2291\" data-start=\"2195\"\u003eAttach the boss clamp to the universal adapter plate using the supplied stainless steel bolts.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2359\" data-start=\"2292\"\u003e\n\u003cp data-end=\"2359\" data-start=\"2295\"\u003eRemove the factory kickstand from the Starlink Standard (Gen 3 \/ V4) terminal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2476\" data-start=\"2360\"\u003e\n\u003cp data-end=\"2476\" data-start=\"2363\"\u003eIf routing internally, feed the Starlink RJ45 connector through the centre of the boss clamp and adapter plate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2577\" data-start=\"2477\"\u003e\n\u003cp data-end=\"2577\" data-start=\"2480\"\u003eConnect the cable to the terminal and slide the adapter fully into the rear mounting interface.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2675\" data-start=\"2578\"\u003e\n\u003cp data-end=\"2675\" data-start=\"2581\"\u003eTighten the rear mounting bolts into the shallow key slots on the underside of the terminal.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2768\" data-start=\"2676\"\u003e\n\u003cp data-end=\"2768\" data-start=\"2679\"\u003ePosition the assembly onto the pole and tighten the stainless steel grub screws evenly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2837\" data-start=\"2769\"\u003e\n\u003cp data-end=\"2837\" data-start=\"2772\"\u003eConfirm alignment and clamp tension before final cable routing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 data-end=\"2866\" data-start=\"2844\"\u003e\u003cstrong data-end=\"2866\" data-start=\"2847\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"3215\" data-start=\"2868\"\u003e⚠️ \u003cem data-end=\"2950\" data-start=\"2871\"\u003e\u003cstrong data-end=\"2949\" data-start=\"2872\"\u003eThis adapter must be installed on a structurally sound pole or mast only.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-end=\"2953\" data-start=\"2950\"\u003e⚠️ \u003cem data-end=\"3012\" data-start=\"2956\"\u003e\u003cstrong data-end=\"3011\" data-start=\"2957\"\u003eDo not exceed the recommended pole diameter range.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-end=\"3015\" data-start=\"3012\"\u003e⚠️ \u003cem data-end=\"3109\" data-start=\"3018\"\u003e\u003cstrong data-end=\"3108\" data-start=\"3019\"\u003eEnsure all grub screws and fasteners are fully tightened to prevent rotation or slip.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-end=\"3112\" data-start=\"3109\"\u003e⚠️ \u003cem data-end=\"3215\" data-start=\"3115\"\u003e\u003cstrong data-end=\"3214\" data-start=\"3116\"\u003eSpacetek is not liable for damage caused by improper installation or inadequate pole strength.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 data-end=\"3244\" data-start=\"3222\"\u003e\u003cstrong data-end=\"3244\" data-start=\"3225\"\u003eIdeal Use Cases\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"3418\" data-start=\"3246\"\u003e✅ Roof-mounted pole installations\u003cbr data-end=\"3282\" data-start=\"3279\"\u003e✅ Wall-mounted mast systems\u003cbr data-end=\"3312\" data-start=\"3309\"\u003e✅ Existing ground or building-mounted poles\u003cbr data-end=\"3358\" data-start=\"3355\"\u003e✅ Residential, rural, and commercial Starlink Gen 3 setups\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/gwx60g_gvwY?si=WDCTPzWxLwWtl7X4\u0026amp;start=7\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"TBAS","offers":[{"title":"Default Title","offer_id":44803129278699,"sku":"ST-GEN3-POLE-ADAPT-HD","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/p-hMfoWF-Starlink_Gen_3_Heavy_Duty_Pole_Adaptor_SIde.jpg?v=1770680815"},{"product_id":"tin-roof-starlink-mount-roof-kit-for-dishy-gen-3-v4","title":"Tin\/Metal Roof Mount Kit for Starlink Standard (Gen 3 \/ V4) – Heavy Duty","description":"\u003cp\u003e\u003cem\u003e✅ Compatibility note: This product suits the \u003cstrong\u003eStarlink Standard (Gen 3 \/ V4)\u003c\/strong\u003e flat rectangular terminal, also commonly called \u003cstrong\u003eStandard Kit, Standard 4 or V4\u003c\/strong\u003e. It does \u003cstrong\u003enot\u003c\/strong\u003e suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.\u003c\/em\u003e\u003c\/p\u003e\u003ch2 data-end=\"274\" data-start=\"198\"\u003e\u003cstrong data-end=\"274\" data-start=\"200\"\u003eStarlink Standard (Gen 3 \/ V4) Tin Roof Mount Kit with Heavy Duty 40mm Pole Adapter\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"687\" data-start=\"296\"\u003eThe Spacetek Heavy Duty Tin Roof Mount Kit is designed for permanent installation of the Starlink Standard (Gen 3 \/ V4) rectangular terminal on corrugated metal roofing in \u003cstrong data-end=\"500\" data-start=\"457\"\u003ehigh wind load and exposed environments\u003c\/strong\u003e. The system uses a reinforced mounting assembly combined with a heavy-duty machined aluminium \u003cstrong data-end=\"607\" data-start=\"576\"\u003eGen 3 to 40mm pole adapter\u003c\/strong\u003e, delivering increased rigidity and improved resistance to uplift and vibration.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Inclusions: \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Standard (Gen 3 \/ V4) Heavy Duty Aluminium Pole Adaptor Kit, suits UTA-232.\u003c\/li\u003e\n\u003cli\u003e2 x Structural Telescopic Stay Bars (Galvanised Steel)\u003c\/li\u003e\n\u003cli\u003e1 x Aluminium Base Plate \u003cmeta charset=\"utf-8\"\u003e(270mm x 75mm)\u003c\/li\u003e\n\u003cli\u003e1 x Aluminium Pole Mast (choice of length) \u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003eGeneric Fastener Pack (please check suitability for your specific install) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e💡Note: \u003c\/strong\u003eOur roof mounting kits \u003cstrong\u003edo not \u003c\/strong\u003ecome with a Starlink Dish. This can be purchased from Starlink.com or a major retailer.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional\u003c\/strong\u003e: If you require additional structural support for the stay bars, you may consider \u003ca rel=\"noopener\" title=\"Duo Cleat high wind stay bar support brackets\" href=\"https:\/\/spacetek.com.au\/products\/duo-cleat-bracket-high-wind-stay-bar-support\" target=\"_blank\"\u003eadding additional cleats\u003c\/a\u003e to the stay bar mounting points on your roof.\u003c\/p\u003e\n\u003cp data-end=\"971\" data-start=\"689\"\u003eStarlink Standard (Gen 3 \/ V4) terminals incorporate a thermal protection shut-off at approximately \u003cstrong data-end=\"782\" data-start=\"773\"\u003e50°C\u003c\/strong\u003e. The elevated pole configuration increases separation from heat-radiating metal roofing, improving airflow around the dish and reducing thermal loading during Australian summer conditions.\u003c\/p\u003e\n\u003cp data-end=\"1217\" data-start=\"973\"\u003eMultiple pole height options are available. Extended variants provide additional clearance over roof obstructions and allow space beneath the dish for secondary antennas, 4G failover equipment, point-to-point radios, or terrestrial TV hardware.\u003c\/p\u003e\n\u003ch2 data-end=\"1381\" data-start=\"1362\"\u003e\u003cstrong data-end=\"1381\" data-start=\"1365\"\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"1492\" data-start=\"1383\"\u003e\u003cstrong data-end=\"1411\" data-start=\"1386\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ High Wind Load Design\u003c\/strong\u003e — Reinforced mounting system suited to exposed locations and wind-prone regions.\u003c\/p\u003e\n\u003cp data-end=\"1593\" data-start=\"1494\"\u003e\u003cstrong data-end=\"1525\" data-start=\"1497\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Gen 3 (V4) Compatibility\u003c\/strong\u003e — Precision-engineered for the Starlink Gen 3 rectangular terminal.\u003c\/p\u003e\n\u003cp data-end=\"1726\" data-start=\"1595\"\u003e\u003cstrong data-end=\"1631\" data-start=\"1598\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Heavy Duty 40 mm Pipe Adapter\u003c\/strong\u003e — Increased wall thickness and clamping surface for improved mast retention and load handling.\u003c\/p\u003e\n\u003cp data-end=\"1874\" data-start=\"1728\"\u003e\u003cstrong data-end=\"1761\" data-start=\"1731\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Thermal Clearance Geometry\u003c\/strong\u003e — Elevated mounting height assists airflow and reduces roof-radiated heat contributing to 50 °C shut-off events.\u003c\/p\u003e\n\u003cp data-end=\"2001\" data-start=\"1876\"\u003e\u003cstrong data-end=\"1906\" data-start=\"1879\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Extended Height Options\u003c\/strong\u003e — Longer poles improve line-of-sight and provide space for auxiliary communications equipment.\u003cstrong data-end=\"2029\" data-start=\"2011\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-end=\"1964\" data-start=\"1936\"\u003e\u003cstrong data-end=\"1964\" data-start=\"1939\"\u003eInstallation Overview (also see \u003ca rel=\"noopener\" title=\"Spacetek Roof Mount Kits Installation\" href=\"https:\/\/www.youtube.com\/watch?v=0lfymRO_26k\" target=\"_blank\"\u003evideo\u003c\/a\u003e below)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eIdentify a potential mounting location with clear sky visibility of the southern sky. (If in the southern hemisphere). TIP : If you are planning to mount on the nothern side of your building, ensure the height of the mount allows the Starlink to tilt and view towards the southern sky and not be obstructed by the roof's structure. \u003c\/li\u003e\n\u003cli\u003eMark fixing points for the included base plate, aligning the peaks of the roofing corrugations with the base plate.  Using pliers, lift up the fixing flaps on the base plate. (This is where the mast\/pipe will fasten onto later on).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply appropriate exterior-grade sealant to all penetration points and screw in the base plate aligned to the marked fixing points. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePass the Starlink Standard (Gen 3 \/ V4) cable through the pipe mast, then center the mast against the raised fixing flaps on the base plate, loosely fastening the mast to the base plate using the supplied hex bolt and nut. \u003c\/li\u003e\n\u003cli\u003eStay bars come in male \/ female pairs, loosely attach both pairs of staybars to the center mast using the pre-drilled holes. With a pair of shifters, bend up the ends of the stay bars to align to the angle of your roof's fixing points. Adjust the length of the stay bars as required to reach a secure fastening point on your roof, then fix the stay bars in place with the included tek screws. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfirm mounting alignment and mechanical rigidity before continuing. \u003c\/li\u003e\n\u003cli\u003ePrepare the Starlink for final mounting position, remove the ground kickstand from the Gen 3 (V4) - consult your Starlink manual for this or see the video \u003ca rel=\"noopener\" title=\"Remove the Starlink Standard (Gen 3 \/ V4) Kickstand\" href=\"https:\/\/www.youtube.com\/shorts\/k3bLEMf6GnQ\" target=\"_blank\"\u003ehere.\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug the Starlink Standard (Gen 3 \/ V4) cable into the back of the Starlink dish ensuring the waterproof glands fit snugly into the port. \u003c\/li\u003e\n\u003cli\u003eAssemble the two pieces of the heavy duty Spacetek pole adaptor together by following this \u003ca href=\"https:\/\/www.youtube.com\/watch?v=gwx60g_gvwY\u0026amp;t=7s\" title=\"Spacetek Heavy Duty Pipe Adapter\" rel=\"noopener\" target=\"_blank\"\u003evideo\u003c\/a\u003e. Insert the Spacetek Heavy Duty Gen 3 (V4) pole adaptor into the Starlink in the position the kickstand was occupying, ensuring it clicks into place and does not come out when agitated. It should be firmly in place. Ensure the cable is running smoothly through the adaptor. This now means the cable can run smoothly through the hole in the adapter and down into the mast. \u003c\/li\u003e\n\u003cli\u003eSlide the Spacetek pole adaptor over the end of the mounted mast, using the grub screws and allen key to tighen \/ create tension around the pole to secure the adaptor. Note - that the Starlink dish should be facing south in preparation for signal calibration, you do not need to full tighten the grub screws as yet. \u003c\/li\u003e\n\u003cli\u003eComplete the cable run \u0026amp; penetration through your roof. \u003c\/li\u003e\n\u003cli\u003eOnce the cable run is complete within the structure, plug into your router. Turn on the power and commence Starlink calibration in your Starlink App as per the instructions in Starlink documentation. \u003c\/li\u003e\n\u003cli\u003eIf required - adjust the angle of the dish by rotating the Spacetek pole adapter and adjusting the grub screws for micro-level adjustments.\u003c\/li\u003e\n\u003cli\u003eOnce fully aligned , tighten the grub screws with the included allen key. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 data-end=\"3340\" data-start=\"3090\"\u003e📽️ \u003cstrong data-end=\"3121\" data-start=\"3094\"\u003eInstallation reference:\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp data-end=\"3340\" data-start=\"3090\"\u003eThe tripod erection and mounting process is demonstrated in the \u003ca rel=\"noopener\" title=\"Spacetek Roof Mount installation video\" href=\"https:\/\/youtu.be\/0lfymRO_26k\" target=\"_blank\"\u003eofficial installation video\u003c\/a\u003e (Gen 2 terminal shown for method reference only). The same procedure applies to Gen 3 using the supplied heavy-duty adapter.\u003c\/p\u003e\n\u003ch2 data-end=\"3369\" data-start=\"3347\"\u003e\u003cstrong data-end=\"3369\" data-start=\"3350\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"3717\" data-start=\"3371\"\u003e\u003cstrong\u003e⚠️ \u003cem data-end=\"3444\" data-start=\"3374\"\u003eNot suitable for ground, freestanding, or portable installation.\u003c\/em\u003e\u003c\/strong\u003e\u003cbr data-end=\"3447\" data-start=\"3444\"\u003e\u003cstrong\u003e⚠️ \u003cem data-end=\"3514\" data-start=\"3450\"\u003eRoof penetrations must be sealed to prevent water ingress.\u003c\/em\u003e\u003c\/strong\u003e\u003cbr data-end=\"3517\" data-start=\"3514\"\u003e\u003cstrong\u003e⚠️ \u003cem data-end=\"3625\" data-start=\"3520\"\u003eThis mount is intended for high-wind regions but must still be fixed to structurally sound roofing.\u003c\/em\u003e\u003c\/strong\u003e\u003cbr data-end=\"3628\" data-start=\"3625\"\u003e\u003cstrong\u003e⚠️ \u003cem data-end=\"3717\" data-start=\"3631\"\u003eProfessional installation is strongly recommended for exposed or elevated sites.\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong data-end=\"3746\" data-start=\"3727\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/gwx60g_gvwY?si=WDCTPzWxLwWtl7X4\u0026amp;start=7\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"TBAS","offers":[{"title":"0.6M Kit Gen 3","offer_id":47904417677547,"sku":"ST-GEN3-TINROOF-HD-0.6M","price":269.95,"currency_code":"AUD","in_stock":true},{"title":"1M Kit Gen 3","offer_id":45355012751595,"sku":"ST-GEN3-TINROOF-HD-1M","price":289.95,"currency_code":"AUD","in_stock":true},{"title":"1.5M Kit Gen 3","offer_id":45355012784363,"sku":"ST-GEN3-TINROOF-HD-1.5M","price":309.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/spacetek-heavy-duty-gen3-roof-mount-black-roof.png?v=1769833598"},{"product_id":"gen-3-basic-in-motion-mount","title":"Starlink Gen 3 In Motion Vehicle Mount - Powder-Coated Aluminium, Bolt Down and compatible with optional magnet upgrade kit","description":"\u003ch2\u003eStarlink Gen 3 In-Motion Mount - Reliable Connectivity On The Move\u003c\/h2\u003e\n\u003cp\u003eStay connected on the go with our In-Motion Mount, specifically engineered and made in Australia for the Starlink Gen 3 (V4) Standard terminal. Built from durable materials and designed for mobile setups, this mount ensures a stable and secure platform for your Starlink terminal, minimizing vibrations and maximizing connectivity, no matter where your adventures take you.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDurable Construction for Lasting Performance\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Basic In-Motion Mount is constructed from powder-coated, folded aluminum and precision-machined, engineering-grade plastic, providing robust protection in any environment. Unlike 3D printed mounts, this expertly crafted design offers superior strength and reliability, ensuring your Starlink terminal stays securely in place, even in challenging conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-Coated Aluminum \u0026amp; Engineering-Grade Plastic:\u003c\/strong\u003e Built to withstand the elements and resist corrosion, providing long-lasting durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-Machined Design:\u003c\/strong\u003e Engineered to maintain structural integrity, keeping your terminal stable and connected on the move.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eVersatile Installation Options\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDesigned with ease of installation in mind, the mount features bolt holes that align perfectly with most roof racks, including popular models like Rhino Rack. This simplifies the installation process, allowing you to integrate the mount seamlessly with your existing setup. For those seeking flexibility, the mount also supports optional rubber-coated earth magnets, offering a non-permanent yet secure attachment solution.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with Roof Racks:\u003c\/strong\u003e Pre-aligned bolt holes make installation straightforward with popular roof rack systems, ensuring a secure fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Mount Option:\u003c\/strong\u003e Use our optional set of rubber-coated earth magnets for a versatile, non-permanent setup that allows easy removal and repositioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSleek, Functional Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eAvailable in both white and black, the Basic In-Motion Mount is designed to blend seamlessly with any vehicle or setup. Its sleek appearance complements your gear while ensuring reliable performance on the road.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e Choose between white and black to match your vehicle or personal preference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAesthetic \u0026amp; Functional:\u003c\/strong\u003e Combines style with practicality, ensuring your mount looks as good as it performs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Choose the Starlink Gen 3 In-Motion Mount?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Basic In-Motion Mount is the ideal solution for digital nomads, RV travelers, and anyone needing reliable internet access while on the move. With its rugged construction, easy installation, and flexible mounting options, it provides the strength and stability required for dependable connectivity wherever you go. All necessary hardware is included, making it your ultimate companion for staying connected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Cable entry and cable depicted not included but can be purchased \u003ca rel=\"noopener\" title=\"Spacetek Starlink Cable Entry Gland\" href=\"https:\/\/spacetek.com.au\/products\/waterproof-cable-entry-gland-for-permanent-starlink-installations\" target=\"_blank\"\u003ehere\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e","brand":"Mildura Laser","offers":[{"title":"Black","offer_id":45762625011947,"sku":"ST-GEN3-INMOTION-MOUNT-BLK","price":499.0,"currency_code":"AUD","in_stock":true},{"title":"White","offer_id":45762625044715,"sku":"ST-GEN3-INMOTION-MOUNT-WHT","price":499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/starlink-gen3-motion-mount-low-profile-side-view.png?v=1769560884"},{"product_id":"starlink-gen-3-flat-adapter-to-gen-2-pole","title":"Starlink Gen 3 Flat Adapter for Gen 2 Poles \u0026 Telescopic RV Mounts","description":"\u003ch2\u003e🛰️ Flat adaptor for mounting Starlink Gen 3 to compatible Gen 2 poles\u003c\/h2\u003e\n\u003cp\u003eThis \u003cstrong\u003eflat adaptor\u003c\/strong\u003e lets you mount a Starlink Gen 3 \/ Standard terminal onto compatible Gen 2 poles or mounts, including telescopic RV-style poles where fitment is suitable.\u003c\/p\u003e\n\n\u003ch3\u003e✅ Useful for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReusing an existing Starlink Gen 2 pole or mount with a Gen 3 terminal.\u003c\/li\u003e\n  \u003cli\u003eCompatible Gen 2 carbon fibre telescopic RV pole setups.\u003c\/li\u003e\n  \u003cli\u003ePortable, RV and off-grid Starlink installations where you want to keep your existing pole hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e📐 Flat mounting \u0026amp; Starlink app orientation warnings\u003c\/h3\u003e\n\u003cp\u003eThis adaptor is designed to mount the Starlink Gen 3 terminal flat. It does not add a 20 degree mounting angle.\u003c\/p\u003e\n\u003cp\u003eThe Starlink app may show an orientation or alignment warning because the terminal is not sitting at the app’s preferred angle. In real-world use, that does not automatically mean the Starlink is installed incorrectly or performing poorly.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eStarlink Gen 3 electronically steers its connection to the satellite network.\u003c\/li\u003e\n  \u003cli\u003eA flat-mounted Gen 3 terminal can still perform normally when it has a clear view of the sky.\u003c\/li\u003e\n  \u003cli\u003eThe most important factor is avoiding obstructions, not matching a specific visual angle in the app.\u003c\/li\u003e\n  \u003cli\u003eIf your Starlink speeds and stability are good, the app warning can usually be treated as guidance rather than a fault.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTip:\u003c\/strong\u003e check the Starlink app obstruction map and real-world performance before changing the mount angle.\u003c\/p\u003e\n\n\u003ch3\u003e🔧 Fitment notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDesigned for Starlink Gen 3 \/ Standard terminals.\u003c\/li\u003e\n  \u003cli\u003eDesigned to suit compatible Starlink Gen 2 poles and mounts.\u003c\/li\u003e\n  \u003cli\u003eCheck pole diameter, locking method and installation conditions before use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003e📦 What’s included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x flat Starlink Gen 3 to Gen 2 pole adaptor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstaller note:\u003c\/strong\u003e confirm compatibility with your specific Gen 2 pole or mount before installation.\u003c\/p\u003e","brand":"OutCamp","offers":[{"title":"Default Title","offer_id":45565097509099,"sku":"ST-GEN3-GEN2-POLE-ADAPTER-FLAT","price":89.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/IMG_0366.png?v=1773566367"},{"product_id":"aluminum-gen-3-v4-starlink-pole-adaptor","title":"Starlink Standard (Gen 3 \/ V4) Pole Adaptor – Aluminium","description":"\u003cp\u003e\u003cem\u003e✅ Compatibility note: This product suits the \u003cstrong\u003eStarlink Standard (Gen 3 \/ V4)\u003c\/strong\u003e flat rectangular terminal, also commonly called \u003cstrong\u003eStandard Kit, Standard 4 or V4\u003c\/strong\u003e. It does \u003cstrong\u003enot\u003c\/strong\u003e suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eAluminium Pole Adaptor for Starlink Standard (Gen 3 \/ V4), Secure, Durable, and Easy to Install\u003c\/h2\u003e\n\u003ch3\u003eSize Compatibility  : \u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eFits 35mm to 51mm (1.38in to 2in) Poles\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eEnhance your Starlink Standard (Gen 3 \/ V4) setup with our Aluminium Pole Adaptor, designed to provide a secure, stable, and hassle-free mounting solution. Constructed from high-quality, powder-coated aluminium, this adaptor features the recommended 20-degree angle suggested by Starlink, unlike other versions available from other suppliers, ensuring optimal performance for your terminal in any environment.\u003cbr\u003e\u003cbr\u003e💡 \u003cstrong\u003eNote\u003c\/strong\u003e: To install, you must first remove the Starlink Kickstand which is shipped attached to the dish. You can see how to do this \u003ca rel=\"noopener\" title=\"Removing Starlink Kickstand\" href=\"https:\/\/www.youtube.com\/shorts\/k3bLEMf6GnQ\" target=\"_blank\"\u003ehere\u003c\/a\u003e. \u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eWhat’s in the box\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Spacetek Starlink Standard (Gen 3 \/ V4) Pole Adaptor in Aluminium powder coated finish. \u003c\/li\u003e\n\u003cli\u003e6x M6 Stainless Steel Screws (304)\u003c\/li\u003e\n\u003cli\u003e1x Allen Key\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eHigh-Quality Powder-Coated Aluminium Construction\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eOur Aluminium Pole Adaptor is crafted from premium-grade aluminium with a durable powder-coated finish, providing added protection and a superior look. The robust construction ensures long-lasting durability and resistance to corrosion, making it suitable for various outdoor installations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable and Lightweight:\u003c\/strong\u003e Made from high-quality, powder-coated aluminium, ensuring strong, rust-resistant performance with added protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Finish:\u003c\/strong\u003e The powder coating enhances durability while providing a sleek, professional appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e Designed for long-term use, this adaptor maintains its integrity even in harsh weather conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eRecommended 20-Degree Angle Design\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThis adaptor incorporates the 20-degree angle recommended by Starlink, which is crucial for optimizing your terminal's positioning. This design sets it apart from other versions available from suppliers, offering better signal focus and stability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarlink-Recommended 20-Degree Angle:\u003c\/strong\u003e Aligns with the positioning angle suggested by Starlink for enhanced signal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnlike Other Suppliers:\u003c\/strong\u003e Our adaptor follows the recommended specifications, ensuring optimal performance compared to flat or less angled mounts from other brands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Signal Focus:\u003c\/strong\u003e Helps reduce obstructions and boosts reliability by directing the terminal effectively toward the sky.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eVersatile Mounting Compatibility\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThis adaptor is compatible with a wide range of poles, accommodating diameters from \u003cstrong\u003e35mm to 51mm (1.38 to 2 inches)\u003c\/strong\u003e, making it an adaptable choice for different setups. Whether you're mounting on an existing pole or setting up a new installation, this adaptor provides the flexibility you need.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 35mm to 51mm (1.38 to 2 inches) Poles:\u003c\/strong\u003e Versatile sizing ensures compatibility with various pole sizes, making it easy to integrate into your current setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect for Different Installations:\u003c\/strong\u003e Ideal for home, vehicle, or other outdoor environments, providing a stable mount for your Starlink Standard (Gen 3 \/ V4).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSecure, Easy Installation \u0026amp; Removal\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eThe Aluminium Pole Adaptor includes all the necessary screws and tools required for installation, ensuring a straightforward and secure setup. Unlike other versions available from suppliers, our adaptor does not require any special tools for removal, making adjustments or relocations effortless.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Installation Kit:\u003c\/strong\u003e Comes with all screws and tools needed, saving you time and hassle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Special Tools Required for Removal:\u003c\/strong\u003e Designed for easy detachment, providing convenience for repositioning or adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Installation:\u003c\/strong\u003e Designed for simple setup, minimizing time and effort required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSleek and Functional Design\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eFinished in a sleek, powder-coated aluminium look, this adaptor not only performs well but also looks great as part of your installation. Its compact and streamlined design minimizes visual impact, keeping your setup clean and unobtrusive.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStylish Appearance:\u003c\/strong\u003e Powder-coated finish complements any installation environment with a superior, polished look.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Design:\u003c\/strong\u003e Ensures a low-profile, professional look that integrates seamlessly with your setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Choose the Aluminium Pole Adaptor for Starlink Standard (Gen 3 \/ V4)?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Aluminium Pole Adaptor offers a robust, versatile, and easy-to-install solution for mounting your Starlink Standard (Gen 3 \/ V4) terminal. With its high-quality, powder-coated construction, Starlink-recommended 20-degree angle, wide compatibility range, and convenient installation and removal features, this adaptor provides the perfect balance of strength and convenience. Whether for residential, mobile, or outdoor setups, this adaptor ensures your Starlink terminal stays securely in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpgrade your Starlink Standard (Gen 3 \/ V4) installation with our Aluminium Pole Adaptor and experience reliable performance with the optimal positioning recommended by Starlink. Order now to secure your terminal with confidence!\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Dongguan Yilian Photoelectric Technology Co Ltd","offers":[{"title":"Default Title","offer_id":45725937303787,"sku":"ST-GEN3-POLE-ADAPTER-STD","price":99.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/spacetek-starlink-gen3-pole-adaptor-aluminium-front-angle.png?v=1775012679"},{"product_id":"starlink-gen-3-v4-v-cell-rugged-housing-mine-spec","title":"Starlink Gen 3 (V4) V-Cell IP68 Rugged Housing - Mine Spec Protective Enclosure","description":"\u003ch2\u003eV-Cell Housing for Starlink Gen 3 (V4) - Ultimate Protection for Extreme Environments\u003c\/h2\u003e\n\u003cp\u003eProtect your Starlink Gen 3 (V4) terminal with the V-Cell Housing, a robust DIY solution designed for the toughest conditions. Manufactured to IP68 standards, this Mine Spec waterproof housing ensures your terminal stays secure and operational in extreme weather, including high winds, cyclones, and challenging marine environments. Whether you're on the move or in a fixed installation, the V-Cell is built for unmatched durability and reliability.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eUnmatched Durability \u0026amp; Easy Installation\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe V-Cell Housing is crafted from high-strength materials similar to Radomes used on large vessels but offers far superior protection. Designed to endure severe weather without cutting or modifying your terminal, the V-Cell provides robust safeguarding for both mobile and stationary setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP68 Standards:\u003c\/strong\u003e Engineered to protect against dust, water, and environmental factors, making it ideal for mobile and fixed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Modifications Required:\u003c\/strong\u003e The V-Cell is designed to fit your Starlink Gen 3 (V4) terminal perfectly, preserving the terminal’s integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY Installation Kit:\u003c\/strong\u003e Comes with all necessary screws, seals, and components, simplifying the installation process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFlexible Mounting Options\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe V-Cell Housing provides versatile mounting solutions, featuring six pre-drilled holes for various custom setups. For non-permanent installations, the V-Cell is compatible with optional rubber-coated earth magnets or mounting rails, providing secure yet adaptable mounting options.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Solutions:\u003c\/strong\u003e Utilize the six mounting holes for custom setups or opt for optional magnets for a non-permanent yet secure attachment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Mounting Rails:\u003c\/strong\u003e Enhance installation flexibility and stability with mounting rails, ideal for structured setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eVersatile Use for Mobile and Marine Environments\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eBuilt to perform under demanding conditions, the V-Cell Housing is perfect for mobile and marine environments. Its rugged design excels in high winds and harsh marine conditions, outperforming similar products on the market.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle \u0026amp; Vessel Ready:\u003c\/strong\u003e Ideal for mounting on vehicles in motion or on vessels needing robust, reliable protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStronger than Standard Radomes:\u003c\/strong\u003e Designed for environments where typical enclosures fall short, providing superior durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy Choose the V-Cell Housing for Starlink Gen 3 (V4)?\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe V-Cell Housing offers exceptional protection, versatility, and ease of installation for your Starlink Gen 3 (V4) terminal. Manufactured to IP68 standards and designed with a flexible DIY approach, it ensures your terminal remains protected and operational in any environment. Whether you’re on the road, at sea, or in a fixed location, the V-Cell delivers the security and performance you need.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquip your Starlink Gen 3 (V4) terminal with the V-Cell Housing and experience reliable protection wherever your journey takes you. Order now to secure your connectivity in any environment.\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpaceTek - Starlink Mounts \u0026 Accessories","offers":[{"title":"Default Title","offer_id":45763161096427,"sku":"ST-GEN3-VCELL-KIT","price":2250.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/gen3-vcell-rugged-enclosure-top-studio.png?v=1775214495"},{"product_id":"tile-roof-starlink-mount-roof-kit-for-gen-3-v4","title":"Tile Roof - Starlink Mount Roof Kit for Gen 3 (Standard 4) - Heavy Duty","description":"\u003ch2\u003eTile Roof Starlink Mount Roof Kit for Gen 3 (Standard 4) - Secure, Weather-Resistant, and Easy to Install\u003c\/h2\u003e\n\u003cp\u003eMount your Starlink Gen 3 (aka Standard 4, 4X) terminal securely on your tile roof with our specially designed Tile Roof Mount Roof Kit. Engineered to provide a stable and weather-resistant installation, this kit ensures your terminal remains securely in place, offering reliable performance even in challenging conditions.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: This kit uses hanging bolts and a U-Bolt that is drilled into the tiles. If you are not looking for this style of kit, please see our\u003ca rel=\"noopener noreferrer\" title=\"Spacetek Wall \/ Eave Starlink Mount\" href=\"https:\/\/spacetek.com.au\/products\/roof-mount-by-starlink-wall-eave-mount-gen-3\" target=\"_blank\"\u003e Wall\/Eave mount\u003c\/a\u003e or \u003ca rel=\"noopener noreferrer\" title=\"Spacetek Starlink Metal Roof Kits\" href=\"https:\/\/spacetek.com.au\/products\/tin-roof-starlink-mount-roof-kit-for-dishy-gen-3-v4-lite-duty\" target=\"_blank\"\u003emetal roof kits\u003c\/a\u003e. \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e💡Tip: \u003c\/strong\u003eIf you are uncertain about installing on a tiled roof (or don't have any spare tiles in case of a breakage), please consider using the \u003ca rel=\"noopener noreferrer\" title=\"Starlink Gen 3 Wall\/Eave Mount Kit\" href=\"https:\/\/spacetek.com.au\/products\/roof-mount-by-starlink-wall-eave-mount-gen-3?_pos=1\u0026amp;_psq=wall+eave\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003eWall\/Eave mount kit\u003c\/a\u003e instead, or a \u003ca rel=\"noopener noreferrer\" title=\"Starlink Gen 3 Tin Roof Kit Heavy Duty\" href=\"https:\/\/spacetek.com.au\/products\/tin-roof-starlink-mount-roof-kit-for-dishy-gen-3-v4\" target=\"_blank\"\u003eTin Roof Kit\u003c\/a\u003e with a longer \u003ca rel=\"noopener noreferrer\" title=\"Starlink Gen 3 Replacement Cable Cat6\" href=\"https:\/\/spacetek.com.au\/products\/starlink-gen-3-replacement-cable-premium-outdoor-rated-cat6-0-5m-to-60m\" target=\"_blank\"\u003eGen 3 cable\u003c\/a\u003e (if you have a another structure on your property).\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKit Inclusions: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy Duty, 40mm Gen 3 (Standard 4) Aluminium Adaptor\u003c\/li\u003e\n\u003cli\u003e2 X Structural Stay Bars\u003c\/li\u003e\n\u003cli\u003eTile Roof Screws (Please note: These are generic tile fasteners and may not suit your specific installation requirements)\u003cstrong\u003e \u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTile Mount U-Bracket \u003c\/li\u003e\n\u003cli\u003e1 x Aluminium Pole Mast (your choice of height) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eRobust and Weather-Resistant Design\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Tile Roof Mount Roof Kit is designed to withstand the elements, providing a secure and stable mounting solution for your Starlink terminal. Made from durable, weather-resistant materials, it ensures that your terminal is protected against wind, rain, and harsh weather conditions, making it ideal for both residential and remote installations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Construction:\u003c\/strong\u003e Built to endure extreme weather conditions, offering reliable protection for your Starlink terminal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure and Stable:\u003c\/strong\u003e Provides a robust mounting solution, ensuring your terminal remains securely positioned on your roof.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eDesigned for Tile Roofs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis mount is specifically tailored for tile roofs, providing a snug fit that integrates seamlessly with various tile types. The mounting system is designed to prevent damage to your roof tiles while offering a secure hold for your terminal. \u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eNOTE: Installation requires drilling three 12mm holes into the tiles using a ceramic drill, ensuring a secure and stable attachment of the U-Bracket to the tiles. If you are not sure about drilling into tiles, please choose an alternative mounting system.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch2 data-end=\"1964\" data-start=\"1936\"\u003e\u003cstrong data-end=\"1964\" data-start=\"1939\"\u003eInstallation Overview (also see \u003ca rel=\"noopener noreferrer\" title=\"Spacetek Roof Mount Kits Installation\" href=\"https:\/\/www.youtube.com\/watch?v=0lfymRO_26k\" target=\"_blank\"\u003evideo\u003c\/a\u003e below)\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003col\u003e\n\u003col\u003e\n\u003cli\u003eIdentify a potential mounting location with clear sky visibility of the southern sky. (If in the southern hemisphere). TIP : If you are planning to mount on the nothern side of your building, ensure the height of the mount allows the Starlink to tilt and view towards the southern sky and not be obstructed by the roof's structure. \u003c\/li\u003e\n\u003cli\u003eMark fixing points on your tiles for the included U-Bracket (See photos in this listing for example). \u003c\/li\u003e\n\u003cli\u003eApply appropriate exterior-grade sealant to all penetration points and screw in the bracket aligned to the marked fixing points. \u003c\/li\u003e\n\u003cli\u003ePass the Starlink Gen 3 (V4) cable through the pipe mast, then center the mast against the U-Bracket, loosely fastening the mast to the base plate using the supplied hex bolt and nut. \u003c\/li\u003e\n\u003cli\u003eStay bars come in male \/ female pairs, loosely attach both pairs of staybars to the center mast using the pre-drilled holes. With a pair of shifters, bend up the ends of the stay bars to align to the angle of your roof's fixing points. Adjust the length of the stay bars as required to reach a secure fastening point on your roof, then fix the stay bars in place with the included tek screws. \u003c\/li\u003e\n\u003cli\u003eConfirm mounting alignment and mechanical rigidity before continuing. \u003c\/li\u003e\n\u003cli\u003ePrepare the Starlink for final mounting position, remove the ground kickstand from the Gen 3 (V4) - consult your Starlink manual for this or see the video \u003ca rel=\"noopener noreferrer\" title=\"Remove the Starlink Gen 3 (V4) Kickstand\" href=\"https:\/\/www.youtube.com\/shorts\/k3bLEMf6GnQ\" target=\"_blank\"\u003ehere.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/ol\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug the Starlink Gen 3 (V4) cable into the back of the Starlink dish ensuring the waterproof glands fit snugly into the port. \u003c\/li\u003e\n\u003cli\u003eAssemble the two pieces of the heavy duty Spacetek pole adaptor together by following this \u003ca href=\"https:\/\/www.youtube.com\/watch?v=gwx60g_gvwY\u0026amp;t=7s\" title=\"Spacetek Heavy Duty Pipe Adapter\" rel=\"noopener noreferrer\" target=\"_blank\"\u003evideo\u003c\/a\u003e. Insert the Spacetek Heavy Duty Gen 3 (V4) pole adaptor into the Starlink in the position the kickstand was occupying, ensuring it clicks into place and does not come out when agitated. It should be firmly in place. Ensure the cable is running smoothly through the adaptor. This now means the cable can run smoothly through the hole in the adapter and down into the mast. \u003c\/li\u003e\n\u003cli\u003eSlide the Spacetek pole adaptor over the end of the mounted mast, using the grub screws and allen key to tighen \/ create tension around the pole to secure the adaptor. Note - that the Starlink dish should be facing south in preparation for signal calibration, you do not need to full tighten the grub screws as yet. \u003c\/li\u003e\n\u003cli\u003eComplete the cable run \u0026amp; penetration through your roof. \u003c\/li\u003e\n\u003cli\u003eOnce the cable run is complete within the structure, plug into your router. Turn on the power and commence Starlink calibration in your Starlink App as per the instructions in Starlink documentation. \u003c\/li\u003e\n\u003cli\u003eIf required - adjust the angle of the dish by rotating the Spacetek pole adapter and adjusting the grub screws for micro-level adjustments.\u003c\/li\u003e\n\u003cli\u003eOnce fully aligned , tighten the grub screws with the included allen key. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 data-end=\"3340\" data-start=\"3090\"\u003e📽️ \u003cstrong data-end=\"3121\" data-start=\"3094\"\u003eInstallation reference:\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp data-end=\"3340\" data-start=\"3090\"\u003eThe tripod erection and mounting process is demonstrated in the \u003ca rel=\"noopener noreferrer\" title=\"Spacetek Roof Mount installation video\" href=\"https:\/\/youtu.be\/0lfymRO_26k\" target=\"_blank\"\u003eofficial installation video\u003c\/a\u003e (Gen 2 terminal shown on a Tin\/Metal roof for reference only). The same procedure applies to Gen 3 using the supplied heavy-duty adapter but take caution when drilling into tiles.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0lfymRO_26k\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"TBAS","offers":[{"title":"1M Kit Gen 3","offer_id":45780952973547,"sku":"ST-GEN3-TILEROOF-1M","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"1.5M Kit Gen 3","offer_id":45780953006315,"sku":"ST-GEN3-TILEROOF-1.5M","price":309.95,"currency_code":"AUD","in_stock":true},{"title":"2M Kit Gen 3","offer_id":45780953039083,"sku":"ST-GEN3-TILEROOF-2M","price":349.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/starlink-gen3-tile-roof-mount-installed-overview.png?v=1774765881"},{"product_id":"tin-roof-starlink-mount-roof-kit-for-dishy-gen-3-v4-lite-duty","title":"Tin\/Metal Roof Mount Kit for Starlink Standard (Gen 3 \/ V4)","description":"\u003cp\u003e\u003cem\u003e✅ Compatibility note: This product suits the \u003cstrong\u003eStarlink Standard (Gen 3 \/ V4)\u003c\/strong\u003e flat rectangular terminal, also commonly called \u003cstrong\u003eStandard Kit, Standard 4 or V4\u003c\/strong\u003e. It does \u003cstrong\u003enot\u003c\/strong\u003e suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.\u003c\/em\u003e\u003c\/p\u003e\u003ch2 data-end=\"69\" data-start=\"0\"\u003e\u003cstrong data-end=\"69\" data-start=\"2\"\u003eStarlink Standard (Gen 3 \/ V4) Tin Roof Mount Kit Aluminium Pole Adapter Included\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cem\u003e\u003cstrong\u003eThese are to suit the Starlink Standard (Gen 3 \/ V4) receiver model is UTA-232\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch2\u003e\u003cstrong\u003eKit Inclusions: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Standard (Gen 3 \/ V4) Aluminium Pole Adaptor \u0026amp; Grub Screws\u003c\/li\u003e\n\u003cli\u003e2 x Structural Telescopic Stay Bars (Galvanised Steel)\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Aluminium Base Plate (270mm x 75mm)\u003c\/li\u003e\n\u003cli\u003e1 x Aluminium Pole Mast (choice of length) \u003c\/li\u003e\n\u003cli\u003eGeneric Fixings Pack (please check suitability for your specific install) \u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote 💡 \u003c\/strong\u003e:  Our mounting kits \u003cstrong\u003edo not\u003c\/strong\u003e come with a Starlink Dish, which can be purchased from Starlink.com or major retailers. \u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eAbout the Stay Bars:\u003c\/strong\u003e\u003cbr\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eOur \u003c\/span\u003e\u003cspan data-markjs=\"true\" class=\"outlook-search-highlight\"\u003estay\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan data-markjs=\"true\" class=\"outlook-search-highlight\"\u003ebar\u003c\/span\u003e\u003cspan\u003es come in male \/ female pairs and can be extended or shortened depending on the mounting angle for the supporting roof structure. Our 1.5m pole kit has our standard size support \u003c\/span\u003e\u003cspan data-markjs=\"true\" class=\"outlook-search-highlight\"\u003ebar\u003c\/span\u003e\u003cspan\u003es and the 0.6m have shorter overall length.  Our standard size (\u003c\/span\u003e\u003cspan\u003efor the 1m and 1.5m kits) are 950mm pairs so they can extend out to aprox 1.5 meters each side. The 0.6m kit has stay bars that extend to roughly 1m each side. \u003c\/span\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe Spacetek Tin Roof Mount Kit is engineered for fixed installation of the Starlink Gen 3 (V4 - Latest) rectangular terminal on corrugated roofing. The system provides a rigid, elevated mounting point while maintaining separation from the roof surface to reduce radiant heat exposure and improve airflow around the terminal.\u003c\/p\u003e\n\u003cp\u003eThis bundle inlcudes our standard powder coated Gen 3 aluminium adaptor.  For higher resistance to weather, you can consider our \u003ca rel=\"noopener\" title=\"Starlink Heavy Duty Metal Roof Kit for Gen 3 (V4)\" href=\"https:\/\/spacetek.com.au\/products\/tin-roof-starlink-mount-roof-kit-for-dishy-gen-3-v4\" target=\"_blank\"\u003eStarlink Heavy Duty Tin Roof Kit for Gen 3 (V4). \u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp data-start=\"643\" data-end=\"941\"\u003eStarlink Standard (Gen 3 \/ V4) terminals incorporate a thermal protection shut-off at approximately \u003cstrong data-start=\"727\" data-end=\"736\"\u003e50°C\u003c\/strong\u003e. The elevated pole design intentionally spaces the dish away from heat radiating from metal roofing during Australian summer conditions, reducing thermal load and helping maintain uninterrupted operation.\u003c\/p\u003e\n\u003cp data-start=\"943\" data-end=\"1251\"\u003eThe kit includes a powder coated aluminium Starlink Compatible Gen 3 pole adapter designed to interface directly with the Starlink V4 mast. \u003cbr\u003e\u003cbr\u003eExtended pole height options are available to improve obstruction clearance and allow additional equipment (such as secondary antennas or Wi-Fi hardware) to be mounted beneath the terminal where required.\u003c\/p\u003e\n\u003ch2 data-end=\"403\" data-start=\"91\"\u003e\u003cstrong data-end=\"836\" data-start=\"820\" style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"957\" data-start=\"838\"\u003e✅ \u003cstrong data-end=\"869\" data-start=\"841\"\u003eGen 3 (V4) Compatibility\u003c\/strong\u003e - Designed specifically for the Starlink Gen 3 rectangular terminal and mast interface.\u003c\/p\u003e\n\u003cp data-end=\"1081\" data-start=\"959\"\u003e\u003cstrong data-end=\"992\" data-start=\"962\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Corrugated Metal Roof Design\u003c\/strong\u003e - Geometry suited to metal roofing profiles commonly used on Australian homes and sheds.\u003c\/p\u003e\n\u003cp data-end=\"1216\" data-start=\"1083\"\u003e\u003cstrong data-end=\"1114\" data-start=\"1086\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Heat \u0026amp; Airflow Clearance\u003c\/strong\u003e - Elevated mounting height reduces exposure to roof radiated heat during high-temperature conditions.\u003c\/p\u003e\n\u003cp data-end=\"1338\" data-start=\"1218\"\u003e\u003cstrong data-end=\"1256\" data-start=\"1221\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Lite Duty Pole Adapter Included\u003c\/strong\u003e - Precision-machined adapter ensures correct mast alignment and secure retention.\u003c\/p\u003e\n\u003cp data-end=\"1468\" data-start=\"1340\"\u003e\u003cstrong data-end=\"1370\" data-start=\"1343\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Extended Height Options\u003c\/strong\u003e - Longer variants provide improved line-of-sight and space for secondary antennas or accessories.\u003c\/p\u003e\n\u003ch2 data-end=\"1964\" data-start=\"1936\"\u003e\u003cstrong data-end=\"1964\" data-start=\"1939\"\u003eInstallation Overview (also see \u003ca rel=\"noopener\" title=\"Spacetek Roof Mount Kits Installation\" href=\"https:\/\/www.youtube.com\/watch?v=0lfymRO_26k\" target=\"_blank\"\u003evideo\u003c\/a\u003e below)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eIdentify a potential mounting location with clear sky visibility of the southern sky. (If in the southern hemisphere). TIP : If you are planning to mount on the nothern side of your building, ensure the height of the mount allows the Starlink to tilt and view towards the southern sky and not be obstructed by the roof's structure. \u003c\/li\u003e\n\u003cli\u003eMark fixing points for the included base plate, aligning the peaks of the roofing corrugations with the base plate.  Using pliers, lift up the fixing flaps on the base plate. (This is where the mast\/pipe will fasten onto later on).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eApply appropriate exterior-grade sealant to all penetration points and screw in the base plate aligned to the marked fixing points. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePass the Starlink Standard (Gen 3 \/ V4) cable through the pipe mast, then center the mast against the raised fixing flaps on the base plate, loosely fastening the mast to the base plate using the supplied hex bolt and nut. \u003c\/li\u003e\n\u003cli\u003eStay bars come in male \/ female pairs, loosely attach both pairs of staybars to the center mast using the pre-drilled holes. With a pair of shifters, bend up the ends of the stay bars to align to the angle of your roof's fixing points. Adjust the length of the stay bars as required to reach a secure fastening point on your roof, then fix the stay bars in place with the included tek screws. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConfirm mounting alignment and mechanical rigidity before continuing. \u003c\/li\u003e\n\u003cli\u003ePrepare the Starlink for final mounting position, remove the ground kickstand from the Gen 3 (V4) - consult your Starlink manual for this or see the video \u003ca rel=\"noopener\" title=\"Remove the Starlink Standard (Gen 3 \/ V4) Kickstand\" href=\"https:\/\/www.youtube.com\/shorts\/k3bLEMf6GnQ\" target=\"_blank\"\u003ehere.\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug the Starlink Standard (Gen 3 \/ V4) cable into the back of the Starlink dish ensuring the waterproof glands fit snugly into the port. \u003c\/li\u003e\n\u003cli\u003eInsert the grey Spacetek Starlink Standard (Gen 3 \/ V4) pole adaptor into the Starlink in the position the kickstand was occupying, ensuring it clicks into place and does not come out when agitated. It should be firmly in place. Ensure the cable is running smoothly through the adaptor. This now means the cable can run smoothly through the hole in the adapter and down into the mast. \u003c\/li\u003e\n\u003cli\u003eSlide the Spacetek pole adaptor over the end of the mounted mast, using the grub screws and allen key to tighen \/ create tension around the pole to secure the adaptor. Note - that the Starlink dish should be facing south in preparation for signal calibration, you do not need to full tighten the grub screws as yet. \u003c\/li\u003e\n\u003cli\u003eComplete the cable run \u0026amp; penetration through your roof. \u003c\/li\u003e\n\u003cli\u003eOnce the cable run is complete within the structure, plug into your router. Turn on the power and commence Starlink calibration in your Starlink App as per the instructions in Starlink documentation. \u003c\/li\u003e\n\u003cli\u003eIf required - adjust the angle of the dish by rotating the Spacetek pole adapter and adjusting the grub screws for micro-level adjustments.\u003c\/li\u003e\n\u003cli\u003eOnce fully aligned , tighten the grub screws with the included allen key. \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong data-end=\"1964\" data-start=\"1939\"\u003e\u003cstrong data-start=\"3101\" data-end=\"3128\"\u003eReference Video:\u003c\/strong\u003e\u003cbr data-start=\"3128\" data-end=\"3131\"\u003e\u003c\/strong\u003eA step-by-step tripod erection and mounting process is demonstrated in the \u003ca title=\"Starlink Roof Mount Installation Video\" href=\"https:\/\/youtu.be\/0lfymRO_26k\"\u003eofficial installation video\u003c\/a\u003e (Gen 2 Starlink is shown for reference only). Use the same procedure for Gen 3 (V4) with the supplied SPACETEK pole adapter which goes over the top of the end of the mast). \u003c\/p\u003e\n\u003ch2 data-end=\"2465\" data-start=\"2443\"\u003e\u003cstrong data-end=\"2465\" data-start=\"2446\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"2768\" data-start=\"2467\"\u003e⚠️ \u003cem data-end=\"2540\" data-start=\"2470\"\u003e\u003cstrong data-end=\"2539\" data-start=\"2471\"\u003eNot suitable for ground, freestanding, or portable installation.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-end=\"2543\" data-start=\"2540\"\u003e⚠️ \u003cem data-end=\"2610\" data-start=\"2546\"\u003e\u003cstrong data-end=\"2609\" data-start=\"2547\"\u003eRoof penetrations must be sealed to prevent water ingress.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-end=\"2613\" data-start=\"2610\"\u003e⚠️ \u003cem data-end=\"2690\" data-start=\"2616\"\u003e\u003cstrong data-end=\"2689\" data-start=\"2617\"\u003eEnsure installation is performed on structurally sound roofing only.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-end=\"2693\" data-start=\"2690\"\u003e⚠️ \u003cem data-end=\"2768\" data-start=\"2696\"\u003e\u003cstrong data-end=\"2767\" data-start=\"2697\"\u003eProfessional installation is recommended for rooftop applications.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-end=\"2950\" data-start=\"2799\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/0lfymRO_26k?si=RIdQrZImlmREg0NE\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"TBAS","offers":[{"title":"0.6m Kit Gen 3","offer_id":47904403980523,"sku":"ST-GEN3-TINROOF-LD-0.6M","price":229.95,"currency_code":"AUD","in_stock":true},{"title":"1M Kit Gen 3","offer_id":45855082316011,"sku":"ST-GEN3-TINROOF-LD-1M","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"1.5M Kit Gen 3","offer_id":45855082348779,"sku":"ST-GEN3-TINROOF-LD-1.5M","price":269.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/spacetek-starlink-gen3-roof-kit-secondary-antenna.png?v=1770435529"},{"product_id":"roof-mount-by-starlink-wall-eave-mount-gen-3","title":"Wall \u0026 Eave Mount for all Starlink Models - 350mm or 750mm long","description":"\u003ch2 data-start=\"107\" data-end=\"391\"\u003eThe Starlink Wall \u0026amp; Eave Mount is a fixed structural mounting solution designed for permanent installation on building walls or eaves\u003c\/h2\u003e\n\u003cp data-start=\"107\" data-end=\"391\"\u003eIt provides a stable, elevated mounting position for the Starlink Gen 3 (V4, Standard 4) \u0026amp; Starlink Mini terminals where roof mounting is not preferred or practical.\u003c\/p\u003e\n\u003cp\u003eManufactured in Australia for Australian \u0026amp; New Zealand conditions, the system includes a pole adapter to suit the selected Starlink model. The adapter incorporates a fixed 20-degree mast angle in line with Starlink installation guidance, supporting correct dish orientation and long-term mechanical stability.\u003c\/p\u003e\n\u003cp\u003eChoose between a \u003cstrong\u003ebracket arm length of 350mm (small) or 750mm (large)\u003c\/strong\u003e. The larger arm is intended for homes with longer eaves (particularly in tropical areas) that cater for larger rainfall. The spigot (pole) is roughly at 320mm \/ 720mm from the base of the arm. The Starlink should be oriented towards te South \/ South East sky. \u003c\/p\u003e\n\u003cp\u003e💡 \u003cstrong\u003eTIP\u003c\/strong\u003e: If mounting on the northern side of your structure, ensure you check clearances as your Starlink dish will be tilted back towards your wall \/ gutters to look at the southern sky.  \u003cbr\u003e\u003cbr\u003ePlease note : Our kits do not come with a Starlink \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Inclusions: \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Starlink Pole Adator \u0026amp; Grub Screws - (Choose Starlink Model) \u003c\/li\u003e\n\u003cli\u003e2 x Aluminium Wall Mount Spacers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Aluminium Wall Mount Bracket\/Arm (Choose Length, 350mm or 750mm). \n\u003cul\u003e\n\u003cli\u003eFor 750mm mount, requires 720mm clearance from wall for spigot. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x 400mm \u003cmeta charset=\"utf-8\"\u003eAluminium Spigot \u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eGeneric Fastener Pack (please check suitability for your specific install)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note, our kits come as raw aluminium (by design) - made proudly by Australian metalworkers in regional Victoria.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote\u003c\/strong\u003e : Starlink Mini Pole Adaptor is ABS Plastic with 6 tension points.  Starlink Gen 3 (V4) adaptor is powder coated aluminium. \u003cbr\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"877\" data-end=\"896\"\u003e\u003cstrong data-start=\"880\" data-end=\"896\"\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"898\" data-end=\"1028\"\u003e✅ \u003cstrong data-start=\"901\" data-end=\"936\"\u003eWall \u0026amp; Eave Structural Mounting\u003c\/strong\u003e — Designed for secure attachment to walls or eaves on residential and commercial buildings.\u003c\/p\u003e\n\u003cp data-start=\"1030\" data-end=\"1163\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ \u003cstrong data-start=\"1033\" data-end=\"1073\"\u003eAluminium Construction\u003c\/strong\u003e — Corrosion-resistant finish suitable for coastal, rural, and high-exposure environments.\u003c\/p\u003e\n\u003cp data-start=\"1165\" data-end=\"1272\"\u003e\u003cstrong data-start=\"1168\" data-end=\"1203\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Integrated 20-Degree Mast Angle\u003c\/strong\u003e — Aligns with Starlink Gen 3 (V4) recommended installation geometry.\u003c\/p\u003e\n\u003cp data-start=\"1274\" data-end=\"1395\"\u003e\u003cstrong data-start=\"1277\" data-end=\"1319\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Pole Adapter Included\u003c\/strong\u003e — Rigid interface engineered for repeated installation without deformation.\u003c\/p\u003e\n\u003cp data-start=\"1397\" data-end=\"1520\"\u003e\u003cstrong data-start=\"1400\" data-end=\"1442\"\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Service-Accessible Installation Height\u003c\/strong\u003e — Allows access via ladder for maintenance or terminal removal when required.\u003cstrong data-start=\"1530\" data-end=\"1548\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1965\" data-end=\"1993\"\u003e\u003cstrong data-start=\"1968\" data-end=\"1993\"\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli data-start=\"1998\" data-end=\"2078\"\u003e\n\u003cp\u003eIdentify a structurally sound wall or eave location with clear sky visibility of the southern sky. (If in the southern hemisphere). TIP : If you are planning to mount on the nothern side of your building, ensure the spigot's height allows the Starlink to tilt towards the southern sky and not be obstructed by the roof structure. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2082\" data-end=\"2151\"\u003e\n\u003cp\u003eMark fixing points aligned with underlying timber, concrete or steel support structure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2155\" data-end=\"2210\"\u003e\n\u003cp\u003ePre-drill fixing holes as required for the substrate. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2214\" data-end=\"2283\"\u003e\n\u003cp\u003eApply appropriate exterior-grade sealant to all penetration points.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2287\" data-end=\"2355\"\u003e\n\u003cp\u003eSecure the mount base onto the penetration points using supplied hardware (or your own), ensure suitability to your specific substrate. If using concrete, wall plugs are recommended (not supplied). The cylinder shaped washes are used to offset the base of the mount against the wall.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the vertical spigot through the center of the mounting arm, fastening the spigot to the mounting arm using the supplied hex bolt and nut. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2440\" data-end=\"2504\"\u003e\n\u003cp\u003eConfirm 90 degree alignment and mechanical rigidity before mounting\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePrepare the Starlink for final mounting position - remove the ground kickstand from the Gen 3 (V4) or Starlink Mini - you can see how to do this \u003ca href=\"https:\/\/www.youtube.com\/shorts\/k3bLEMf6GnQ\" title=\"Remove the Starlink Gen 3 (V4) Kickstand\" rel=\"noopener\" target=\"_blank\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the Starlink cable data cable into the Starlink, you have two options for cable run, (a) you can pass the cable through the pole adapter and into the spigot, securing the cable along the bottom of the arm with cable ties and then back into your home\/structure. or (b) you can exit the cable near the top of the pole adapter, running the cable down the adapter , across the top of the mounting arm and back into your home \/ structure. Ensure in both cable runs you remove excess slack and secure the cable to the mount. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInsert the SPACETEK pole adaptor for the Starlink into the same position the kickstand was occupying, ensuring it clicks into place and does not come out when agitated. It should be firmly in place. Ensure the cable is running smoothly through the adaptor. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSlide the SPACETEK pole adaptor over the end of the mounted spigot, using the grub screws and included allen key to tighten \/ create tension around the pole to secure the adaptor. Note - that the Starlink dish should be facing south in preparation for signal calibration, you do not need to full tighten the grub screws as yet. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOnce the cable run is complete within the home\/structure and reaches the router. Turn everything on and commence Starlink calibration in your Starlink App as per the instructions in Starlink documentation. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIf required - adjust the angle of the dish by turning the dish on the spigot and adjusting the grub screws for micro-level adjustments using the Starlink app calibration process as a guide.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOnce fully aligned , tighten the grub screws with the included allen key. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 data-start=\"2511\" data-end=\"2533\"\u003e\u003cstrong data-start=\"2514\" data-end=\"2533\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"2535\" data-end=\"2857\"\u003e⚠️ \u003cem data-start=\"2538\" data-end=\"2609\"\u003e\u003cstrong data-start=\"2539\" data-end=\"2608\"\u003eNot suitable for ground, freestanding, or portable installations.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-start=\"2609\" data-end=\"2612\"\u003e⚠️ \u003cem data-start=\"2615\" data-end=\"2691\"\u003e\u003cstrong data-start=\"2616\" data-end=\"2690\"\u003eAll roof or wall penetrations must be sealed to prevent water ingress.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-start=\"2691\" data-end=\"2694\"\u003e⚠️ \u003cem data-start=\"2697\" data-end=\"2770\"\u003e\u003cstrong data-start=\"2698\" data-end=\"2769\"\u003eUse only substrate-rated fasteners and fix into structural members.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr data-start=\"2770\" data-end=\"2773\"\u003e⚠️ \u003cem data-start=\"2776\" data-end=\"2857\"\u003e\u003cstrong data-start=\"2777\" data-end=\"2856\"\u003eProfessional installation is recommended\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2 data-start=\"2864\" data-end=\"2886\"\u003e\u003cstrong data-start=\"2867\" data-end=\"2886\"\u003eIdeal Use Cases\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-start=\"2888\" data-end=\"3060\"\u003e✅ Residential wall installations\u003cbr data-start=\"2920\" data-end=\"2923\"\u003e✅ Eave-mounted Starlink systems\u003cbr data-start=\"2954\" data-end=\"2957\"\u003e✅ Rural and regional properties\u003cbr data-start=\"2988\" data-end=\"2991\"\u003e✅ Fixed building installations where roof mounting is not preferred\u003c\/p\u003e","brand":"TBAS","offers":[{"title":"Starlink Gen 3 Standard 4 (UTA-232) \/ Short - 350mm","offer_id":47915068883179,"sku":"ST-GEN3-WALLEAVE-STD-SHORT","price":249.95,"currency_code":"AUD","in_stock":true},{"title":"Starlink Gen 3 Standard 4 (UTA-232) \/ Long - 750mm","offer_id":47915068915947,"sku":"ST-GEN3-WALLEAVE-STD-LONG","price":329.95,"currency_code":"AUD","in_stock":true},{"title":"Starlink Mini (UTA-231) \/ Short - 350mm","offer_id":48297138094315,"sku":"ST-MINI-WALLEAVE-STD-SHORT","price":199.95,"currency_code":"AUD","in_stock":true},{"title":"Starlink Mini (UTA-231) \/ Long - 750mm","offer_id":48297138127083,"sku":"ST-MINI-WALLEAVE-STD-LONG","price":279.95,"currency_code":"AUD","in_stock":true},{"title":"Starlink Gen 2 (UTA-212) \/ Short - 350mm","offer_id":48297341616363,"sku":"ST-GEN2-WALL-EAVE-MOUNT","price":179.95,"currency_code":"AUD","in_stock":true},{"title":"Starlink Gen 2 (UTA-212) \/ Long - 750mm","offer_id":48297341649131,"sku":"ST-GEN2-WALL-EAVE-MOUNT-LONG","price":249.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/Starlink_Gen_3_Wall_Mount_Kit_Spacetek_Customer_Install.jpg?v=1770508553"},{"product_id":"gen-3-v4-ridge-cap-mount-for-starlink","title":"Ridge Cap Roof Mount Kit for Starlink Standard (Gen 3 \/ V4)","description":"\u003cp\u003e\u003cem\u003e✅ Compatibility note: This product suits the \u003cstrong\u003eStarlink Standard (Gen 3 \/ V4)\u003c\/strong\u003e flat rectangular terminal, also commonly called \u003cstrong\u003eStandard Kit, Standard 4 or V4\u003c\/strong\u003e. It does \u003cstrong\u003enot\u003c\/strong\u003e suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003e\u003cstrong\u003eRidge Cap Roof Mount for latest residential Starlink,\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cstrong\u003eStandard (Gen 3 \/ V4). \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eStandard (Gen 3 \/ V4) Ridge Cap Mount\u003c\/strong\u003e is expertly designed to securely install your Starlink Standard (Gen 3 \/ V4) terminal on the ridge of standard residential \u003cstrong\u003emetal roofs\u003c\/strong\u003e with a \u003cstrong\u003e25–30 degree\u003c\/strong\u003e pitch. Fully adjustable to fit most situations, this mount provides the optimal elevation needed for uninterrupted signal reception, making it ideal for both residential and commercial applications.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKit Inclusions: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x\u003cstrong\u003e \u003c\/strong\u003eAluminium\u003cstrong\u003e \u003c\/strong\u003e30 Degree Ridge Cap Plates \u003c\/li\u003e\n\u003cli\u003e1 x 240mm Aluminium Spigot \u003c\/li\u003e\n\u003cli\u003e1 x Standard (Gen 3 \/ V4) Aluminium Pole Adaptor \u0026amp; Grub Screws \u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e✅ Precision Fit\u003c\/strong\u003e: Tailored for standard residential tin roofs with a 25–30 degree pitch, this mount is fully adjustable, ensuring a secure and stable installation for various setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Durable Construction\u003c\/strong\u003e: Built with high-quality materials to endure harsh weather conditions. It is, however, \u003cstrong\u003enot recommended for extremely hot regions\u003c\/strong\u003e due to the \u003cstrong\u003emaximum operating temperature of the Starlink terminal\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e✅ Enhanced Signal Positioning\u003c\/strong\u003e: The elevated ridge positioning helps clear low-lying obstructions like trees or buildings, ensuring stronger and more reliable signal reception.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e✅  Included Adapter\u003c\/strong\u003e: The mount includes the \u003cstrong\u003eStandard (Gen 3 \/ V4) Starlink Pole Adapter\u003c\/strong\u003e, ensuring easy and secure attachment of the terminal, similar to the adapter used in the \u003cstrong\u003eAluminum Standard (Gen 3 \/ V4) Pole Adapter\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e✅  Easy and Adjustable Installation\u003c\/strong\u003e: Fully adjustable to accommodate a range of roof designs and pitches, providing flexibility for various installation needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e✅  Ideal For\u003c\/strong\u003e: Residential and commercial installations where a 25–30 degree tin roof pitch offers the best positioning for clear signal reception. \u003cmeta charset=\"utf-8\"\u003eWe recommend using these in cooler climate areas where peak summer temperatures are below 40 degrees celcius.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLooking for Extra Clearance?\u003c\/strong\u003e\u003cbr\u003eTo further clear low-lying obstructions and improve obstacle avoidance, we suggest using our \u003cstrong\u003e1m, 1.5m, or 2m \u003ca href=\"https:\/\/kounft3wzngyeq01-61054583019.shopifypreview.com\/products\/tin-roof-starlink-mount-roof-kit-for-dishy-gen-3-v4-lite-duty?_pos=1\u0026amp;_psq=Tin+Roof+Mount\" title=\"Tin Roof Mount Kit Starlink Gen 3 Spacetek\" rel=\"noopener\" target=\"_blank\"\u003eTin Roof Mount Kit\u003c\/a\u003e\u003c\/strong\u003e for additional elevation and enhanced signal reception and to avoid the 50 degree temperature shut down of the Starlink Gen 3. \u003cbr\u003e\u003c\/p\u003e","brand":"TBAS","offers":[{"title":"Default Title","offer_id":45860556177643,"sku":"ST-GEN3-RIDGE-KIT","price":269.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/spacetek-starlink-gen3-ridge-mount-bracket-closeup.png?v=1770543832"},{"product_id":"genuine-replacement-ground-kickstand-for-starlink-gen-3-v4-terminal-stable-outdoor-support-for-ground-setup","title":"Genuine Ground Kickstand for Starlink Standard (Gen 3 \/ V4)","description":"\u003cp\u003e\u003cem\u003e✅ Compatibility note: This product suits the \u003cstrong\u003eStarlink Standard (Gen 3 \/ V4)\u003c\/strong\u003e flat rectangular terminal, also commonly called \u003cstrong\u003eStandard Kit, Standard 4 or V4\u003c\/strong\u003e. It does \u003cstrong\u003enot\u003c\/strong\u003e suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eOptimised Ground Support for Starlink Standard (Gen 3 \/ V4) Terminals\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eThis product is out of stock , but you can find an alternative \u003ca href=\"https:\/\/spacetek.com.au\/products\/quick-release-kickstand-pipe-tripod-pole-adaptor-for-starlink\" target=\"_blank\" title=\"Starlink Quick Release Kickstand replacement for Gen 3 and Mini\" rel=\"noopener\"\u003ehere\u003c\/a\u003e:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e https:\/\/spacetek.com.au\/products\/quick-release-kickstand-pipe-tripod-pole-adaptor-for-starlink  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaximize the stability of your Starlink Standard (Gen 3 \/ V4) terminal with this Genuine Replacement Ground Kickstand. Engineered specifically for ground use, this durable kickstand provides a secure and reliable foundation for your satellite terminal, making it perfect for outdoor ground setups that require consistent positioning and optimal signal reception. Designed to meet Starlink’s rigorous quality standards, this kickstand is crafted from weather-resistant materials, able to withstand challenging outdoor environments such as wind, rain, and temperature extremes, while maintaining a solid base for your terminal.\u003c\/p\u003e\n\u003cp\u003eWith straightforward installation, this replacement kickstand allows you to quickly and securely position your Starlink Standard (Gen 3 \/ V4) terminal on the ground without complex mounting solutions. Ideal for both temporary and semi-permanent ground installations, this kickstand is an essential accessory for Starlink users who need dependable ground support. Ensure uninterrupted connectivity with a design that prioritizes stability and ease of setup.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine Replacement Part\u003c\/strong\u003e: Made for Starlink Standard (Gen 3 \/ V4) terminals, ensuring precise compatibility and dependable ground support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround-Focused Design\u003c\/strong\u003e: Specifically suited for ground installations, providing a stable and reliable base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Construction\u003c\/strong\u003e: Built with robust, weather-resistant materials to withstand outdoor conditions like high winds and fluctuating temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation\u003c\/strong\u003e: Allows for quick, tool-free setup on various ground surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect for Temporary or Semi-Permanent Ground Use\u003c\/strong\u003e: Ideal for users who need a flexible, stable solution for ground placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Durable, weather-resistant materials designed for outdoor use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility\u003c\/strong\u003e: Starlink Standard (Gen 3 \/ V4) terminals only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: Matches standard kickstand specifications for ground use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SpaceTek - Starlink Mounts \u0026 Accessories","offers":[{"title":"Default Title","offer_id":45967234138347,"sku":"ST-SL-GEN3-KICKSTAND","price":24.65,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/p-D2O5Kd-IMG_1641.jpg?v=1768213984"},{"product_id":"starlink-atco-demountable-site-hut-wall-mount-gen-3","title":"Starlink Standard (Gen 3 \/ V4) Wall Mount Kit – Atco, Demountable, Site Hut \u0026 Fence","description":"\u003cp\u003e\u003cem\u003e✅ Compatibility note: This product suits the \u003cstrong\u003eStarlink Standard (Gen 3 \/ V4)\u003c\/strong\u003e flat rectangular terminal, also commonly called \u003cstrong\u003eStandard Kit, Standard 4 or V4\u003c\/strong\u003e. It does \u003cstrong\u003enot\u003c\/strong\u003e suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.\u003c\/em\u003e\u003c\/p\u003e\u003ch2 data-end=\"255\" data-start=\"176\"\u003e\u003cstrong data-end=\"255\" data-start=\"178\"\u003eA multi purpose Starlink compatible wall mounting kit, suitable for site huts \u0026amp; fences, Atco structures \u0026amp; more \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"687\" data-start=\"282\"\u003eThe SpaceTek Atco Wall Mount kit for \u003cstrong data-end=\"333\" data-start=\"310\"\u003eStarlink Standard (Gen 3 \/ V4)\u003c\/strong\u003e is purpose-built for installation onto composite wall systems such as cool room panels, Atco style demountables, site huts, and mining accommodation buildings including Colorbond fences or Colorbond cladded structures.\u003cbr\u003e\u003cbr data-end=\"496\" data-start=\"493\"\u003eIt provides a strong, stable mounting solution without needing to penetrate roof structures or locate internal timber or steel framing, which is often missing in insulated panel construction or certain types of demountable strucutres.\u003c\/p\u003e\n\u003cp data-end=\"1086\" data-start=\"689\"\u003eThis wall mount uses a \u003cstrong data-end=\"747\" data-start=\"712\"\u003ecompression-style fixing system\u003c\/strong\u003e that clamps securely onto panels up to \u003cstrong data-end=\"802\" data-start=\"787\"\u003e100mm thick\u003c\/strong\u003e, distributing wind and structural forces evenly across the panel surface. With a full \u003cstrong data-end=\"914\" data-start=\"889\"\u003e1 metre mounting pole and adapter\u003c\/strong\u003e, it provides approximately \u003cstrong data-end=\"964\" data-start=\"942\"\u003e300mm of elevation\u003c\/strong\u003e from the mounting arm to the terminal, ensuring improved clearance and reliable sky visibility for your Gen 3 terminal.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKit Inclusions: \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Standard (Gen 3 \/ V4), Aluminium Pole Adator \u0026amp; Grub Screws -\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChoice of Standard Duty (cast) or Heavy Duty (machined aluminium from billet) Pole Adaptor.  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eChoose heavy duty where strong wind and\/or environmental conditions require additional strength.  \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e2 x Aluminium Wall Mount Brackets \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eChoice of Standard Duty (shorter) or Heavy Duty (longer) wall brackets (see photos).  \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 x Aluminium Wall Mount Spacers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Aluminium Pole Mast 1m in Length\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eGeneric Fastener Pack (please check suitability for your specific install) \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"1112\" data-start=\"1093\"\u003e\u003cstrong data-end=\"1112\" data-start=\"1096\"\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3 data-end=\"1150\" data-start=\"1114\"\u003e\u003cstrong data-end=\"1150\" data-start=\"1121\"\u003e✅ Compression Fixing System\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"1283\" data-start=\"1151\"\u003eClamps directly onto insulated wall panels using long-thread bolts and large square washers, removing the need for internal framing.\u003c\/p\u003e\n\u003ch3 data-end=\"1150\" data-start=\"1114\"\u003e\n\u003cstrong data-end=\"1150\" data-start=\"1121\"\u003e✅ \u003c\/strong\u003e\u003cstrong data-end=\"1324\" data-start=\"1292\"\u003eLoad Distribution for Safety\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp data-end=\"1431\" data-start=\"1325\"\u003eMultiple pickup points spread wind forces across a wider area of the panel, improving long-term stability.\u003c\/p\u003e\n\u003ch3 data-end=\"1150\" data-start=\"1114\"\u003e\n\u003cstrong data-end=\"1150\" data-start=\"1121\"\u003e✅ \u003c\/strong\u003e\u003cstrong data-end=\"1472\" data-start=\"1440\"\u003eNo Roof Penetration Required\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp data-end=\"1559\" data-start=\"1473\"\u003eInstalls entirely through the wall panel, reducing risk of leaks or damage to roofing.\u003c\/p\u003e\n\u003ch3 data-end=\"1150\" data-start=\"1114\"\u003e\n\u003cstrong data-end=\"1150\" data-start=\"1121\"\u003e✅ \u003c\/strong\u003e\u003cstrong data-end=\"1597\" data-start=\"1568\"\u003e1m Vertical Mounting Rail\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp data-end=\"1723\" data-start=\"1598\"\u003eProvides roughly 300mm rise from the arm to the Starlink terminal including its leg, giving better clearance above obstacles.\u003c\/p\u003e\n\u003ch3 data-end=\"1150\" data-start=\"1114\"\u003e\n\u003cstrong data-end=\"1150\" data-start=\"1121\"\u003e✅ \u003c\/strong\u003e\u003cstrong data-end=\"1764\" data-start=\"1732\"\u003eIdeal for Portable Buildings\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp data-end=\"1872\" data-start=\"1765\"\u003ePerfect for Atco huts, demountables, site offices, mine-site accommodation, and cool room panel structures.\u003cstrong data-end=\"1900\" data-start=\"1882\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 data-end=\"2414\" data-start=\"2386\"\u003e\u003cstrong data-end=\"2414\" data-start=\"2389\"\u003eInstallation Overview\u003c\/strong\u003e\u003c\/h2\u003e\n\u003col data-end=\"2914\" data-start=\"2416\"\u003e\n\u003cli data-end=\"2491\" data-start=\"2416\"\u003e\n\u003cp data-end=\"2491\" data-start=\"2419\"\u003ePosition the mount vertically on the chosen section of the wall panel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2575\" data-start=\"2492\"\u003e\n\u003cp data-end=\"2575\" data-start=\"2495\"\u003eMark and drill holes through the panel according to the mount’s pickup points.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2626\" data-start=\"2576\"\u003e\n\u003cp data-end=\"2626\" data-start=\"2579\"\u003eInsert the \u003cstrong data-end=\"2605\" data-start=\"2590\"\u003e120mm bolts\u003c\/strong\u003e through the panel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2715\" data-start=\"2627\"\u003e\n\u003cp data-end=\"2715\" data-start=\"2630\"\u003eFit the large square washers on the opposite side to distribute compression forces.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2787\" data-start=\"2716\"\u003e\n\u003cp data-end=\"2787\" data-start=\"2719\"\u003eTighten the bolts evenly to clamp the mount securely to the panel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2852\" data-start=\"2788\"\u003e\n\u003cp data-end=\"2852\" data-start=\"2791\"\u003eAttach the Starlink Standard (Gen 3 \/ V4) terminal to the top mounting pole with the adaptor.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2914\" data-start=\"2853\"\u003e\n\u003cp data-end=\"2914\" data-start=\"2856\"\u003eConfirm elevation and alignment before final tightening.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr data-end=\"2919\" data-start=\"2916\"\u003e\n\u003ch2 data-end=\"2943\" data-start=\"2921\"\u003e\u003cstrong data-end=\"2943\" data-start=\"2924\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-end=\"3185\" data-start=\"2945\"\u003e⚠️ \u003cstrong data-end=\"2978\" data-start=\"2948\"\u003e\u003cem data-end=\"2976\" data-start=\"2950\"\u003eDo not overtighten bolts\u003c\/em\u003e\u003c\/strong\u003e – excessive compression can dent or deform insulated panels.\u003cbr data-end=\"3107\" data-start=\"3104\"\u003e⚠️ \u003cstrong data-end=\"3185\" data-start=\"3110\"\u003e\u003cem data-end=\"3183\" data-start=\"3112\"\u003eAlways ensure the panel is free of electrical wiring before drilling.\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong data-end=\"3784\" data-start=\"3720\"\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"SpaceTek","offers":[{"title":"Heavy Duty","offer_id":47111484211435,"sku":"ST-GEN3-ATCO-WM-HD","price":389.95,"currency_code":"AUD","in_stock":true},{"title":"Standard","offer_id":47111484178667,"sku":"ST-GEN3-ATCO-WM-STD","price":329.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/files\/Starlink_Gen_3_Atco_installation_heavy_duty.png?v=1773568141"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0610\/5458\/3019\/collections\/gen3.webp?v=1764656743","url":"https:\/\/spacetek.net\/collections\/gen-3-v4-mounts.oembed","provider":"SPACETEK","version":"1.0","type":"link"}