Starlink Standard Gen 3 / V4 Metal Roof Mount Kit

Specifications

✅ Compatibility note: This product suits the Starlink Standard (Gen 3 / V4) flat rectangular terminal, also commonly called Standard Kit, Standard 4 or V4. It does not suit Starlink Mini, Gen 2 actuated Standard, High Performance or Flat High Performance models unless specifically stated.

Starlink Standard (Gen 3 / V4) Metal Roof Mount Kit with Heavy Duty 1.6 in (40 mm) Pole Adapter

The Spacetek Heavy Duty Metal Roof Mount Kit is designed for permanent installation of the Starlink Standard (Gen 3 / V4) rectangular terminal on corrugated metal roofing in high wind load and exposed environments. The system uses a reinforced mounting assembly combined with a heavy-duty machined aluminum Gen 3 to 1.6 in (40 mm) pole adapter, delivering increased rigidity and improved resistance to uplift and vibration.

📦 What’s included

• 1 x Standard (Gen 3 / V4) Heavy Duty Aluminum Pole Adaptor Kit, suits UTA-232.
• 2 x Structural Telescopic Stay Bars (Galvanized Steel)
• 1 x Aluminum Base Plate (10.6 x 3.0 in / 270 x 75 mm)
• 1 x Aluminum Pole Mast (choice of length)
• Generic Fastener Pack (please check suitability for your specific install) 

🛰️ Don't have Starlink yet? Your Starlink kit isn't included. Order it direct from Starlink through our referral link and you may be eligible for Starlink's current referral offer.

Optional Add On: If you require additional structural support for the stay bars, you may consider adding additional cleats to the stay bar mounting points on your roof. We also have an extra heavy duty base plate which is larger and covers more area for extreme environments. 

Starlink Standard (Gen 3 / V4) terminals incorporate a thermal protection shut-off at approximately 122°F (50°C). The elevated pole configuration increases separation from heat-radiating metal roofing, improving airflow around the dish and reducing thermal loading in hot summer conditions.

Multiple pole height options are available. Extended variants provide additional clearance over roof obstructions and allow space beneath the dish for secondary antennas, 4G/5G failover equipment, point-to-point WiFi, or terrestrial TV hardware.

Key Features

✅ High Wind Load Design — Reinforced mounting system suited to exposed locations and wind-prone regions.

✅ Gen 3 (V4) Compatibility — Precision-engineered for the Starlink Gen 3 rectangular terminal.

✅ Heavy Duty 1.6 in (40 mm) Pipe Adapter — Increased wall thickness and clamping surface for improved mast retention and load handling.

✅ Thermal Clearance Geometry — Elevated mounting height assists airflow and reduces roof-radiated heat contributing to 122°F (50°C) shut-off events.

✅ Extended Height Options — Longer poles improve line-of-sight and provide space for auxiliary communications equipment.

Installation Overview (also see video below)

Please see our complete installation guide here: Heavy Duty Metal Roof Mount installation guide →

📽️ Installation reference:

The tripod erection and mounting process is demonstrated in the official installation video (Gen 2 terminal shown for method reference only). The same procedure applies to Gen 3 using the supplied heavy-duty adapter.

Important Notes

⚠️ Not suitable for ground, freestanding, or portable installation.
⚠️ Roof penetrations must be sealed to prevent water ingress.
⚠️ This mount is intended for high-wind regions but must still be fixed to structurally sound roofing.
⚠️ Professional installation is strongly recommended for exposed or elevated sites.