Starlink Mini Windscreen Suction Mount – White or Black

Specifications

🛰️ A removable windscreen mount for Starlink Mini

Set up your Starlink Mini inside a parked vehicle without drilling. This mount combines a shaped Mini support frame with two locking suction cups for temporary placement on suitable windscreen glass.

Choose White or Black. The mount is an accessory only: the Starlink Mini terminal shown in the images is not included but can be purchased from Starlink here. 

Choose this if

• You want a removable setup for stops in a caravan, campervan or 4WD.
• You have clean, smooth glass and enough space for the mount and terminal without obstructing the cabin.
• Your dashboard can support the base; the suction cups help stabilise the setup rather than carrying it freely from the glass.

Compatibility and fitment

Designed for the Starlink Mini terminal, not Starlink Standard (Gen 2 or Gen 3 / V4) or Starlink Performance. This is not a mount for the separate Starlink Router Mini.

Windscreen angle, glass curvature and dashboard layout vary between vehicles. Check the available space and both suction-cup contact areas before fitting. Do not attach the cups to textured or porous trim.

✅ Practical features

• Two locking suction cups: attach to suitable glass without drilling mounting holes.
• Adjustable cup joints: allow the contact angle to be set for the installation.
• Removable support frame: lets you pack the mount away between stationary sessions.
• Two colour choices: select a White or Black frame.

📦 What's included

• 1 × Starlink Mini suction mount assembly in your selected colour, with two locking suction cups.

🛰️ Starlink terminal not included. This product includes Spacetek accessories only; purchase your Starlink kit separately from here.

🛠️ Installation overview

1. With the vehicle parked, select a low, stable position where the dashboard supports the base and the setup stays clear of airbags, mirrors, sensors, vents and controls.
2. Clean and dry the glass and suction-cup contact surfaces, removing dust, oils and residue.
3. Position the cups flat against suitable glass, engage their locks and adjust the joints without forcing them.
4. Fit the Mini into the support frame, check that it is seated securely and route its cable with slack so it cannot pull on the mount.
5. Test the hold before use and recheck it regularly. Remove and store the setup before driving.

Specifications

⚠️ Important notes

• For stationary use only. This is not a permanent fixing or an in-motion mounting system.
• Keep the driver's field of view and all airbag deployment areas clear. Follow applicable vehicle and road rules.
• Suction depends on surface condition and can release. Check the hold regularly and remove the setup if it becomes unstable.
• Check Starlink performance in your chosen position; vehicle glass and obstructions can affect reception.
• This is a third-party accessory, not an official Starlink or SpaceX product.

Need help choosing?

Contact Spacetek for help identifying your Starlink model and choosing a mounting option for your setup.