Starlink Standard (Gen 3 / V4) Facia Mount with Tilt & Extension pole

Specifications

Starlink Standard Gen 3 / V4 fascia & wall mount kit with extension pole & tilt function

Set up your Starlink Standard (Gen 3 / V4) on a roof edge, wall or fascia-style mounting point with a compact, light duty, pole-mount kit built for a neat fixed install where the mount is not exposed to harsh conditions. 

This mount supports a flexible tilt friendly base which can alter the overall angle of the mount to help orientate the dish away from obstructions. 

This kit uses our own proven, high quality aluminium Gen 3 (V4) pole adaptor and includes an extension pole in the box, so the kit is ready for installations that need extra pole height compared with the base mounting kit. Please refer to the dimensions in the images for more information. 

✅ Choose this if

• You have a Starlink Standard (Gen 3 / V4) dish.
• You need a roof, wall or fascia-style pole mount for a fixed installation where a lighter setup is acceptable. 
• You want the Spacetek aluminium pole adaptor included with the mounting kit.
• You need the added extension pole supplied as part of the kit.
• You have the option to create the right vertical angle depending on your mounting surface.
  
  ⚠️ For harsher locations or more exposed installs, compare our Aluminium Wall & Eave Mount. It uses a folded 5mm aluminium mounting arm designed for coastal, rural and high-exposure environments, with 350mm and 750mm arm options for extra reach and clearance.
  

🛰️ Compatibility

• Designed for the Starlink Standard (Gen 3 / V4) dish.
• The included Spacetek aluminium pole adaptor is for the Gen 3 / V4 Standard dish mount interface.
• Not intended for Starlink Mini or earlier round/actuated Starlink dish models unless separately confirmed with the correct adaptor.

📦 What’s included

• Roof/wall/fascia pole mounting kit components.
• Spacetek Gen 3 / V4 aluminium pole adaptor.
• Extension pole.
• Mounting hardware supplied with the kit.

⚠️ Not included

• Starlink dish, router, cables and Starlink service plan.
• Site-specific sealant, tools or specialist fixings that may be required for your mounting surface.

🛠️ Installation notes

• Install only on a structurally suitable surface using fixings appropriate for the wall, fascia or roof-edge material.
• Keep the dish clear of obstructions and allow safe cable routing back to the Starlink router or power location.
• If you are unsure about wind loading, waterproofing or roof-edge fixing, use a qualified installer.

📏 Key specifications

• Compatible dish: Starlink Standard (Gen 3 / V4).
• Mount style: roof, wall or fascia pole mount.
• Adaptor: Spacetek Gen 3 / V4 aluminium pole adaptor.
  
• Material: Powder Coated Galvanised Steel
• Included upgrade: extension pole.